Agilent Technologies Infiniium 90000 Q-Series User Manual page 20

1
Setting Up the Oscilloscope
• An AutoProbe II interface connector with pins that provide probe
Figure 4
The AutoProbe II interface works with the InfiniiMax III probing system.
There are four different InfiniiMax III probe amplifiers ranging from 16 to
30 GHz. For more information, see
Data
Before using the InfiniiMax III probes, review the InfiniiMax III Probe
Handling Guide included with the probes. These probes are ESD sensitive
devices and there is a proper order for connecting probe amplifiers to the
oscilloscope, probe heads to the device under test (DUT), and probe heads
to the amplifier. You can also find the InfiniiMax III Probe Handling
Guide on the Agilent web site (www.agilent.com) or with other Agilent
oscilloscope probes documentation in the Probe Resource Center
(www.agilent.com/find/prc).
The N5442A Precision BNC 50
probing system with the 90000 Q- Series oscilloscopes.
20
power, identification, and other communication signals.
90000 Q-Series Oscilloscope Probe Connectors
Sheet.
Agilent InfiniiMax III Probing System
adapter lets you use the InfiniiMax II
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide