To Adjust Horizontal Scale - Agilent Technologies Infiniium 90000 Q-Series User Manual

3
Using the Oscilloscope

To adjust horizontal scale

• To stretch the waveform horizontally, click the larger waveform button
Click here to
display the
horizontal
setup dialog
box
Figure 36 Adjusting Horizontal Scale
68
next to the horizontal scale setting at the bottom of the waveform
display. To shrink the waveform horizontally, click the smaller waveform
button.
See Figure 36. The oscilloscope decreases or increases the number of
seconds per division based on your selection.
You can also adjust the horizontal scale by clicking the current setting.
This displays a pop- up numeric keypad that lets you set an exact value
for the horizontal scale. Or, you can adjust the horizontal scale through
the Horizontal Setup dialog box. See "To access the horizontal setup" on
page 70.
Click here to set
the horizontal
scale directly
through a
pop-up numeric
keypad
Click to stretch
the waveform
Click to shrink
(fewer seconds
the waveform
per division)
(more
seconds per
division)
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide