To Adjust Vertical Scaling - Agilent Technologies Infiniium 90000 Q-Series User Manual

To adjust vertical scaling

• To make the waveform bigger, click the larger waveform button next to
Figure 33 Adjusting Vertical Scaling
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide
the channel number near the top of the display. To make the waveform
smaller, click the smaller waveform button.
See figure 33. The number of volts per division decreases.
The number of volts per division increases. The current setting in volts
per division is shown next to the waveform buttons for the channel.
Notice that the setting is color- coded to match the waveform color for
easy recognition.
You can also adjust the vertical scaling by clicking the current setting,
which is shown next to the waveform buttons for the channel. This
displays a pop- up numeric keypad that lets you set an exact value for
the scaling. Or, you can adjust the vertical scaling through the Channel
Setup dialog box. See
Click to display a pop-up
numeric keypad that lets
you specify a particular
vertical scaling value
"To access the channel setup"
Using the Oscilloscope
on page 66.
Click to make the
waveform bigger
(fewer volts per
division)
Click to make the
waveform smaller
(more volts per
division)
3
65