To Start And Stop Waveform Acquisition; To Clear The Waveform Display - Agilent Technologies Infiniium 90000 Q-Series User Manual

To start and stop waveform acquisition

• To start waveform acquisition, click the start button at the bottom of
• To stop waveform acquisition, click the stop button at the bottom of the
Click this button
to start waveform
Figure 27 Start and Stop Icons

To clear the waveform display

• Click the clear display button at the bottom of the waveform display.
Figure 28 Clearing the Display
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide
the waveform display area.
waveform display area.
See Figure 27.
You can still use the [Run/Stop] key on the front panel.
Click this button
to stop waveform
See Figure 28.
You can still use the [Clear Display] key on the front panel while the
graphical interface is enabled.
Clearing the display removes all displayed waveform data in preparation
for another acquisition. It also resets all automatic measurements and
measurement statistics.
Click this button to
clear the waveform
display
Using the Oscilloscope
61
3