Agilent Technologies Infiniium 90000 Q-Series User Manual page 64

Hide thumbs Also See for Infiniium 90000 Q-Series:

Table of Contents

Using the Oscilloscope

Click to access the

Channel Setup dialog box,

then set vertical offset

using the spin box or

numeric keypad...

Figure 32 Adjusting Vertical Offset

If you leave the mouse pointer on the waveform (without clicking), the

pointer changes into crossed arrows as a visual indicator that you can

drag the waveform when you click and hold. If you move the crossed

arrow pointer up or down, the interface constrains the movement

vertically and adjusts vertical offset only. If you initially move the

crossed arrow pointer left or right, the interface constrains the

movement horizontally and changes the horizontal position setting only.

You can also adjust the vertical offset through the Channel Setup dialog

box. See "To access the channel setup" on page 66.

Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide

...or click the

ground reference

indicator and drag it

up or down to

change the vertical

offset...

...or click the

waveform and

drag it up or down

to do the same

thing.

Table of Contents