To Position For Proper Airflow - Agilent Technologies Infiniium 90000 Q-Series User Manual

1
Setting Up the Oscilloscope

To position for proper airflow

1
Figure 1
Do not place the oscilloscope side-by-side with other instruments blowing warm air.
C A U T I O N
16
Position the oscilloscope where it will have sufficient clearance for
airflow around the top, back, and sides.
Minimum 100 mm
Positioning the 90000 Q-Series Oscilloscope with Sufficient Clearance
Minimum 0 mm
Front panel of oscilloscope
Minimum 0 mm
Minimum 39 mm
Rear Panel
Top View
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide
Minimum 100 mm