Front Panel Inputs And Outputs; Channel 1-4 Inputs; Realedge 1R, 3R Channel Inputs - Agilent Technologies Infiniium 90000 Q-Series User Manual

3
Using the Oscilloscope

Front Panel Inputs and Outputs

On the Infiniium 90000 Q- Series oscilloscopes, the channel inputs and the
Aux Out and Cal Out outputs appear on the lower part of the front panel.
Aux Out Cal Out
Figure 8 Infiniium 90000 Q-Series Oscilloscope Front Panel I/O

Channel 1-4 Inputs

The channel 1- 4 inputs have:
• 3.5 mm threaded RF connectors.
• A convenient automatic torque mechanism.
• An AutoProbe II interface connector with pins that provide probe
The AutoProbe II interface works with the InfiniiMax III probing system.
See
You can also connect 3.5 mm threaded RF cables to the channel 1- 4
inputs.

RealEdge 1R, 3R Channel Inputs

The [RealEdge] key and 1R and 3R channel inputs appear on 50 GHz and
62 GHz bandwidth models.
Pressing the [RealEdge] key enables or disables the RealEdge 1R and 3R
channel inputs. The [RealEdge] key is lit when enabled.
Figure 9
32
power, identification, and other communication signals.
"To connect oscilloscope probes"
1R RealEdge 3R
RealEdge Channel Inputs and [RealEdge] Key
on page 19.
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide
1R RealEdge 3R