Back Panel Inputs And Outputs; Motherboard I/O; Usb Device Port - Agilent Technologies Infiniium 90000 Q-Series User Manual

Back Panel Inputs and Outputs

The Infiniium 90000 Q- Series oscilloscope's back panel has the
motherboard I/O connectors, a USB device port, and reference clock
synchronization connectors.
Mouse and
keyboard
connectors
Figure 10 Infiniium 90000 Q-Series Oscilloscope Back Panel I/O

Motherboard I/O

These are the inputs/outputs/ports provided by the motherboard in the
oscilloscope: PS/2 mouse and keyboard connectors, external monitor
connectors, serial interface, USB host ports, LAN port, speaker and
microphone connectors, etc.

USB Device Port

The back panel USB device port can be used for remote control of the
oscilloscope from a PC.
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide
LAN connector
(Non Auto-
MDIX)
DVI
USB host
ports
Trig Out Aux Trig 10 MHz in
Using the Oscilloscope
CAUTION: Power down
Removable
instrument before
Hard Drive insertion or removal
of hard drive.
Device
USB
100 - 240V
device port
N O T I C E
Well-regulated power
required for 100-120V
operation.
CAUTION: Use only with
power cable specified by
owner's guide.
WARNING: Maintain
ground to avoid electric
shock.
10 MHz out 100 MHz in 100 MHz out
3
AC power cord
plugs into here
~ Line
1350W Max
50/60 Hz
N10149
169323
35