Upgrade Procedures; Micb Release 2 Or Micb Release 3 Card Upgrade; Nortel Integrated Conference Bridge: Service Implementation Fundamentals; Nn43001-558/555-4001-135 01.02 Standard - Nortel 2100 Fundamentals

Item
E-Mail format

Upgrade procedures

MICB Release 2 or MICB Release 3 card upgrade

Use
(page 225)
Procedure 43
MICB Release 2 or MICB Release 3 card upgrade
Step
1
2
3
4
5
6
7
8
9
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100

Nortel Integrated Conference Bridge: Service Implementation Fundamentals

Copyright © 2007, Nortel Networks
.
Description
• Microsoft Outlook
Changes to the E-Mail format should be reviewed and made visible to people
who will be creating meetings.
Procedure 43 "MICB Release 2 or MICB Release 3 card upgrade"
to upgrade your ICB card from Release 2 or Release 3.
Action
Disable the operational MICB Release 2 or MICB Release 3 card
using LD 32.
Note: CS 2100/Meridian SL-100 customers must Bsy the ICB
card at the PM level, before starting the procedure and RTS the
card once the upgrade is complete.
Pull the MICB Release 2 or MICB Release 3 card out from the slot.
Remove the MICB Release 2 or MICB Release 3 PCMCIA from
the lower socket.
Insert a new ICB Release 4 PCMCIA in the lower socket of the
new ICB Release 4 card (vintage BC). This PCMCIA should be as
shipped from the factory, with no customer data on it.
Remove the security device from the old card and move it to the
new ICB Release 4 card.
Insert the new ICB Release 4 (vintage BC) into the slot.
Enter the new keycode.
When the card is activated as ICB Release 4, enter the CLI and
login as an administrator. Enter:
name: admin
Password: <CR>
Where CR is an empty password.
Insert the old MICB Release 2 or MICB Release 3 PCMCIA in the
upper socket.

NN43001-558/555-4001-135 01.02 Standard

ICB Release 4 20 June 2007
Upgrade procedures 225