Simple Network Management Protocol (Snmp) - Nortel 1000 Fundamentals

Table 58
MSDL commands
Command
ENL DCH num
DIS DCH num
STAT DCH num
RLS DCH num
EST DCH num

Simple Network Management Protocol (SNMP)

An SNMP stack sends appropriate traps to TM 3.1 or an SNMP manager.
A buffer containing received traps is also available through the CLI if no
SNMP/Alarm Manager exists.
Error traps
Table 59 "Error events" (page 399)
SNMP agent to issue a trap.
Table 59
Error events
Event
Loss of Voice Port connectivity
QoS Minor Threshold Exceeded
dspResetAttempted
dspResetFailed
Leader Not Responding
DCHIP Not Responding
C7 PC Card Failed
Other traps
Table 60 "SNMP trap causing events" (page 399)
cause the SNMP agent to issue a trap.
Table 60
SNMP trap causing events
Command
Card Disabled
Copyright © 2007, Nortel Networks
.
Description
Enables the D-channel.
Disables the D-channel.
Displays the state of the D-channel application.
Releases the D-channel.
Establishes multiple frame operation on the
D-channel.
Description
Failure in the Ethernet voice port.
The QoS minor alarm threshold has been exceeded.
One of the DSP devices has failed and an attempt
has been made to reset it.
An attempt to reset a DSP has failed. The channels
associated with that DSP are unusable.
The Leader card is not responding.
A DCHIP card is not responding.
The PC Card Device Driver detected that the C7 PC
Card has failed. The D-channel link is released.
Function
The card has been disabled by the system.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
System level maintenance 399
shows the error events that cause the
shows other events that