Nortel 1000 Fundamentals page 245

3
Figure 54
DSP Profile Profile Options tab
4
5
Copyright © 2007, Nortel Networks
.
Configure IP Trunk 3.01 (and later) data in TM 3.1 245
Click the Profile Options tab. See
Options tab" (page 245). This tab displays the default General and
FAX options values according to the selected DSP profile.
Change the General and FAX option parameters, if required. To
revert to the default settings, click Reset Defaults.
CAUTION
The default DSP Profile Option settings for each codec
are appropriate for most applications. Only an expert in
VoIP should modify the Profile Options parameters.
Trunk 3.01 (and later) DSP profile settings" (page 161)
Click the Codec Options tab. See
Options tab" (page 246). This tab displays the default order of the
preferred codec selection for outgoing calls and shows advanced
codec parameters for the selected codec.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Figure 54 "DSP Profile Profile
Figure 55 "DSP Profile Codec
"IP