Nortel 1000 Fundamentals page 302

302 Provisioning IP Trunk 3.01 (and later) in TM 3.1
Figure 92
ITG ISDN IP Trunk window
3
4
5
6
Copyright © 2007, Nortel Networks
.
From the IP Telephony Gateway – ISDN IP Trunk window menu
bar, select Configuration > Node > Add.
The Add ITG Node dialog box shown in
dialog box" (page 302)
Figure 93
Add ITG Node dialog box
The Add ITG Node window indicates the system type. For IP Trunk
3.01 (and later), select Meridian 1 or MMCS.
Click a radio button to indicate whether to retrieve the information
from an existing remote node, or to define the node configuration
manually. Nortel recommends selecting the "Define the node
configuration manually" radio button, as TM 3.1 generates
comprehensive provisioning files, including the BOOTP.1 file, the
CONFIG1.INI file, and all address resolution information.
Select the application release of the node to be defined from the
drop-down list. Click OK.
The New ITG Node window opens. See
General tab" (page 303).
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Figure 93 "Add ITG Node
opens.
Figure 94 "New ITG node