Retrieve And Add An Ip Trunk 3.01 (And Later) Node For Maintenance And Diagnostic Purposes - Nortel 1000 Fundamentals

Retrieve and add an IP Trunk 3.01 (and later) node for maintenance and diagnostic purposes 355

8
9
Figure 143
Determine IP trunk card status
Retrieve and add an IP Trunk 3.01 (and later) node for maintenance
and diagnostic purposes
Follow the steps in
(and later) node" (page 356)
later) node for retrieving and viewing the real IP Trunk 3.01 (and later)
node configuration, without overwriting the existing IP Trunk 3.01 (and
later) configuration data for an existing node in the TM 3.1 IP Trunk 3.01
(and later) database. Retrieving the real IP Trunk 3.01 (and later) node
configuration to the "dummy" node is useful in the following cases:
•
•
Copyright © 2007, Nortel Networks
.
The Retrieve control dialog box displays the results of the retrieval.
The node properties, card properties and dialing plan are retrieved
from the Leader card.
Click Close when the download is complete.
Refresh the card status and check that the cards in the new node
are responding.To determine the IP trunk card status, in the IP
Telephony Gateway – ISDN IP Trunk window click View > Refresh
> All.
Look at the IP trunk card in the bottom window and see what is
under the title "Card State". See
card status" (page
Procedure 57 "Creating a dummy IP Trunk 3.01
isolating IP Trunk 3.01 (and later) node configuration faults
determining which copy of the database is correct, so that the required
direction of database synchronization can be determined:
— transmit the TM 3.1 IP Trunk 3.01 (and later) database to the IP
Trunk 3.01 (and later) node
— retrieve the database from the IP Trunk 3.01 (and later) node for the
TM 3.1 IP Trunk 3.01 (and later) node
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Figure 143 "Determine IP trunk
355).
—End—
to create a "dummy" IP Trunk 3.01 (and