Ordering Rules And Guidelines; Ordering Rules For An Ip Trunk 3.01 (And Later) Node - Nortel 1000 Fundamentals

36 System description
Component
IP Trunk 3.01 (and later) NTP CD-ROM – Multilingual
PC Cards
C7LIU DCH PC Card with Layer 2 DCH Software

Ordering rules and guidelines

IP Trunk 3.01 (and later) can be ordered as a VoIP trunk gateway with 32
ports, or as a software upgrade on an existing VoIP trunk gateway on the
Media Card 32-port trunk card or ITG-Pentium 24-port trunk card. One IP
Trunk card in the system must be equipped with a D-Channel PC Card kit.
One kit supports 12 Media Card 32-port trunk or 16 ITG-Pentium 24-port
trunk card with a maximum of 382 total ports.

Ordering rules for an IP Trunk 3.01 (and later) node

Initial configuration of an IP Trunk 3.01 (and later) node requires one
NTVQ01BB IP Trunk 3.01 Small and Large Systems 32-port package
with DCHIP as appropriate for the system. These packages include all
components needed for a single-card node, except for the cables that
provide interface to the MSDL and SDI/DCH cards. The following DCH
interface cables are included:
•
•
The following packages are required for IP Trunk 3.01 (and later):
•
•
TM 3.1 is required and must be ordered separately.
For MSDL and DCHIP cards that reside in the same Large System UEM
equipment row, order:
•
For MSDL and DCHIP cards that reside in different Large System Universal
Equipment Modules (UEM) equipment rows in a multi-row Large System,
order:
•
Copyright © 2007, Nortel Networks
.
NTND26AA (Large Systems)
NTAK19FB and NTWE04AD (Small Systems)
ISDN Base (ISDN) package 145
ISDN Signaling Link (ISL) package 147
NTND26 MSDL DCH cable in sufficient length to reach from the MSDL
to the I/O Panel of the IPE module that contains the DCHIP
NTMF04BA MSDL DCH Extender (50 ft.) cable to reach between the
I/O Panels of the two UEM equipment rows
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Product codes
NTVQ61BA
NTWE07AA