Chapter 11
Frequently Asked Questions
The chapter provides answers to frequently asked questions.
Navigation
•
Backup, restore, and reset operations
•
Password protection
•
Fault management
•
System and status information
•
Connectivity problems
•
IP addresses
Backup, restore, and reset operations
This section contains answers to the following questions:
•
How do I back up the database?
•
How do I restore the BCM450 from a previous backup?
•
How do I complete a Warm Reset or Cold Reset? Is it safe and will I lose customer data?
page 88
How do I back up the database?
Use the following procedure to back up the BCM450 database.
To perform a backup
1
In the task panel, click the Administration tab.
2
Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab. In the Backup To
selection field, choose a destination for the backup archive.
3
Click the Backup button.
The Backup window opens.
4
In the Optional Components table, select or clear the check box for each component to
include or exclude these components from the backup operation.
5
Click the OK button.
A warning window opens. Read the warning carefully before proceeding.
on page 89
on page 90
on page 91
on page 95
on page 96
on page 87
on page 87
on page 88
BCM450 Troubleshooting Guide
87
on