Example 8: Element Manager Incorrectly Shows Expansion Cabinet As Empty - Nortel BM450 Troubleshooting Manual

68 Chapter 5 Advanced Troubleshooting
Example 8: Element Manager incorrectly shows expansion
cabinet as empty
Use the following procedure when a module is installed in the expansion cabinet, but the Element
Manager shows the expansion cabinet as empty, and the MBM is not active.
1
Select Configuration > Resources > Telephony Resources.
2
Double-click the Module Type field for the expansion cabinet.
3
Select the module from the list.
4 Configure the module and select Enable.
NN40160-700 NN40160-700