2
Select the System folder and click the Keycodes task.
The Keycodes panel displays and the installed features appear in the Keycodes list.
3
To enter a new keycode, click Load File.
4
Browse to where you saved the keycode file you downloaded from KRS.
5
Click Open.
The file uploads and the feature appears in the Keycodes list.
To verify the keycodes using Telset
1
Select Feature 9*8 from a two-line display telephone.
2
Enter the following user ID and password:
User ID: SETNNA
Password: CONFIG
The numerical values of the user ID and password are 738662 and 266344, respectively.
3
Press NEXT to scroll through the menu and select Feature Codes.
4
Press OK.
The system ID (SID) displays.
5
Press NEXT.
6
Enter your sequence ID.
7
Press NEXT to scroll through the list and perform one or both of the following tasks:
a
To activate features, select Feature List.
•
Press SHOW to view the available features.
•
Use the soft keys to activate features for your system.
b To enter a new keycode, select Entitlement Code.
•
Press SHOW to view the current keycode.
•
Use the soft keys to modify the keycode for your system.
Restart or shut down the system
You can use the Reset utility in Element Manager to:
•
reboot the BCM450 system
•
perform a warm reset of telephony services
•
perform a cold reset of telephony services
•
shut down the system
Use this procedure to restart the system.
Chapter 3 Hardware Troubleshooting
BCM450 Troubleshooting Guide
25