Connecting Power - HP Surestore 160ex - Optical Jukebox User Manual

Connecting Power

1. Ensure the power switch on the jukebox is OFF (see Figure 1-1).)
NOTE Use the power cord shipped with the jukebox.
2. Plug the socket end of the power cord into the power port on the bottom of the
3. Plug the other end of the power cord into a power outlet.
4.
5. Turn the power on.
NOTE
If DEVICE FAILED displays. See "Troubleshooting" in Chapter 3 for
troubleshooting procedures.
NOTE
Go to "Configuring Write Verify" on the next page to complete the installation.
Chapter 1
interface enclosure (see "8" on Figure 1-2).
(After the jukebox is moved to its operating location) Lower the leveler feet and
tighten the 1/2-inch nut on each foot.
TESTING and NOT READY alternately display. Once the poweron test
completes (approximately 1.5 minutes), READY displays.
Setting Up the Jukebox
Connecting Power
1-13