NOTE
Operating the Jukebox
Ejecting a Disk From the Jukebox
Ejecting a Disk From the Jukebox
Some software packages require that you load and eject disks by following the
instructions in the software. If you use a software package to manage files in the
jukebox, check the software documentation before proceeding with these steps.
Start with READY in the display.
1. Press
until EJECT * displays and then press
NEXT
2. EJECT SLOT # displays. ("#" is flashing and the number of the first storage
slot in the jukebox that contains an optical disk.)
3. If you want to select the storage slot number that shows in the display, press
or
. If you want to choose a different storage slot, press
EJECT
ENTER
until the desired slot number displays and then press
PREV
on the following page.)
EJECTING displays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to EJECT SLOT #.
4. Remove the disk from the mailslot.
You may now eject additional disks by pressing
2 through 4 until you are finished ejecting disks. When the last disk is ejected,
EMPTY displays briefly before returning to EJECT *.
5. Press
to return to the READY state.
CANCEL
3-12
.
ENTER
NEXT
. (See the note
ENTER
and then following steps
ENTER
Chapter 3
or