Setting An Operating Configuration - HP Surestore 160ex - Optical Jukebox User Manual

Setting an Operating Configuration

READY
You can set configurations to customize the way the jukebox operates.
Start with READY in the display.
1. Press
2. Enter the administration password.
3. TEST * displays. Press
4. Press
5. If the current configuration setting is flashing, press
6. Press
CAUTION
Turning off the jukebox in the next step could cause data loss if not done correctly.
Do not turn off power to the jukebox until you are sure the SCSI bus is inactive.
Removing power from a SCSI device when the bus is active can result in data loss
and/or indeterminate bus states. Check your host system manuals for information
about checking the SCSI bus status. If your computer is connected to a LAN, be sure
to check with your system administrator before turning off power to the jukebox.
7. Turn the jukebox OFF, then ON to save the configuration to the jukebox flash
Configurations are described in the following table.
Chapter 3
>
ADMIN *
until ADMIN * displays.
NEXT
Instructions for entering this password are in "Entering the Administration
Menu Password" previously in this chapter.
NEXT
or until the name of the configuration you wish to set displays
NEXT PREV
and then press . (Configurations are described on the following pages.)
ENTER
If the configuration has multiple settings, the current setting flashes. Otherwise,
the configuration is set and a confirmation message displays.
desired setting displays, and then press
then the configuration's name and setting displays.
to return to READY.
CANCEL
ROM.
Operating the Jukebox
Setting an Operating Configuration
>
CONFIG *
until CONFIG * displays, and then press
NEXT
. OPTION SAVED displays and
ENTER
.
ENTER
or until the
PREV
3-19