System Show Packages - HP StoreOnce B6000 Series Reference Manual

system show packages

Description of Command Function
Displays information on the software packages currently installed on the StoreOnce appliance and
packages that have been added to the queue for installation.
Command Syntax
system show packages
Command Authority
Operator and Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to the command syntax.
Successful Command Output
Upon successful completion of the command, information on the installed packages is listed.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, display the following:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# system show packages
D2D APPLIANCE:
Packages consistent across all nodes
D2D_3.0
D2D_Patch_199
The following packages are queued for update:
D2D_Patch_200
NODE1:
D2D_3.0
D2D_Patch_199
NODE2:
D2D_3.0
D2D_Patch_199
system show packages 63