Catalyst Modify Client - HP StoreOnce B6000 Series Reference Manual

1. If the command does not conform to the required syntax, the following is displayed:
Command Failed
SYNTAX where SYNTAX is the command syntax as described under "Command Syntax" in
this section.
2. If the service set defined in the command entry does not exist, the following is displayed:
Command Failed
in the command entry.
3. If the object store container defined in the command entry does not exist, the following is
displayed:
Command Failed
container object defined in the command entry.
4. If the object store container does not exist within the service set, the following is displayed:
Command Failed
and SETX are the labels in the command entry.
Example
# catalyst modify set1 JulyPayroll primary low secondary none
JulyPayroll modified

catalyst modify client

Description of Command Function
This command provides a method to modify the parameters of a client certificate which has
previously been created with the "catalyst create client" command entry.
Command Syntax
catalyst create client [SETX] [OBJECT] <CLIENT> passphrase <"passphrase"> <"passphrase">
allow-create {yes|no}(default = no)
Command Authority
Administrator
Command Object Requirements
The following objects listed below may be included in the command entry after "catalyst modify
client".
SETX – This defines the service set in which the client resides. This object is required in the
command entry when used on multi-node StoreOnce appliances. SETX is a label which uniquely
defines the service set. X is a numeric index. The command entry "catalyst show client" can
be used to obtain a detailed listing of client certificates and the associated service sets within
the appliance. Refer to section 3.4.16 for details.
CLIENT – This represents the client certificate with is to be modified. This object is defined
with a unique text string label. The command entry "catalyst show client" can be used to obtain
a detailed listing of client certificates within the appliance. Refer to section 3.4.16 for details.
Command Parameter Requirements
The following parameters may be included in the command entry and appear after the objects:
passphrase – This parameter defines the passphrase which is used to confirm identity. This
parameter consists of the word "passphrase" followed by an ASCII character text string
enclosed in quotations. To ensure accuracy, an identical text string in quotations must be exist
after the first string.
Allow-create – This parameter defines if the client is allowed to create object store containers.
If allowed the client could create an associate itself with object store containers via an
the command does not conform to the required syntax,
SETX does not exist. where SETX is the label for the service set
OBJSTORE does not exist. where OBJSTORE is the object store
OBJSTORE does not exist within SETX. where OBJSTORE
catalyst modify client 91