License Load - HP StoreOnce B6000 Series Reference Manual

license load

Description of Command Function
Provides for the installation of a StoreOnce appliance license. The license is entered as a file image
which exists in the StoreOnce appliances repository directory. The means by which the license file
is placed in the repository directory is outside the scope of the CLI.
Command Syntax
license load <file-image>
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command entry.
Command Parameter Requirements
file-image – The name of the license file in the StoreOnce directory must appear in the command
entry after license load. The license is purchased by the customer and provided by HP. The
means by which the license file is place in the StoreOnce appliance repository directory is beyond
the scope of the CLI.
Requirements for Command Execution
The command entry must conform to the command syntax.
Successful Command Output
Upon successful completion of the command, the following is displayed:
license loaded successfully
Command Operation during Abnormal Conditions
1. If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section
2. If the license is invalid, the following is displayed:
Command Failed
Example
# license load HP_D2D_543467
license loaded successfully
34 Alphabetical List of Commands and Details
license invalid