Snmp Set Contact - HP StoreOnce B6000 Series Reference Manual

snmp set contact

Description of Command Function
Defines a text string indicating the contact person for SNMP agent management of this StoreOnce
appliance.
Command Syntax
snmp set contact <"contact">
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
contact – This is a required parameter. It consists of a character text string enclosed in quotations.
The text string provides information on the contact responsible for the management of the StoreOnce
appliance's SNMP agent.
Requirements for Command Execution
The command entry must conform to the command syntax.
Successful Command Output
Upon successful entry of the command sequence, the SNMP contact is defined and the following
is displayed:
Command Successful, contact set
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, display the following:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# snmp set contact "JAdmin"
Command Successful, contact set
snmp set contact 47