Catalyst Create - HP StoreOnce B6000 Series Reference Manual

word defining the day of the week at which the bandwidth window ends. The words may be
Mon, Tues, Wed, Thurs, Fri, Sat or Sun.
stop time – This parameter defines the time at which the bandwidth window ends. It is required.
It consists of the text "stop-time" followed by a time displayed in 24 hour format hh:mm where
hh represents the hours and mm represent the minutes. If this parameter is not included in the
command entry, a time of 24:00 is used by default. In other words, the bandwidth window
ends when the day defined by the "stop-day" parameter ends.
Requirements for Command Execution
The command entry must conform to the command syntax.
The object store container defined in the command entry must exist.
The service set, if defined in the command entry, must exist
The object store container must exist within the service set, if defined.
Successful Command Output
Upon successful completion of the command, the following message will be displayed:
WinX created for OBJSTORE
Command Operation during Abnormal Conditions
1. If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX where SYNTAX is the command syntax as described under Command Syntax in this
section.
2. If the object store container (OBJSTORE) defined in the command entry does not exist, the
following message will be displayed:
Command Failed
the object store container in the command entry.
3. If the service set (SETX) defined in the command entry does not exist, the following message
will be displayed:
Command Failed
in the command entry.
4. If the object store container (OBJSTORE) defined in the command entry is not part of the service
set (SETX) defined in the command entry, the following message will be displayed:
Command Failed
the label for the object store container in the command entry and SETX is the label for the
service set in the command entry.
Example
# catalyst create bw-window set1 JulyPayroll start-day Mon stop-day Fri
WIN3 created for SET1
duration: weekly
start: Mon 00:00
stop: Fri 24:00
limit: 0 MB/s

catalyst create

Description of Command Function
This command creates an object store container defined by a unique label provided by the user.
The mode of data transport is also defined for the object store container. An optional description
may also be included. Refer to specification "Sustenhorn Systems Engineering Specification" in
section 1.3.1 for further details on the overall implementation of the object store function into
80 Command Instruction Set Details FULL SET SAVE FOR LATER
OBJSTORE does not exist. where OBJSTORE is the label for
SETX does not exist. where SETX is the label for the service set
OBJSTORE does not exist within SETX where OBJSTORE is