Catalyst Modify Ports - HP StoreOnce B6000 Series Reference Manual

application interface separate from the appliance GUI or CLI. This parameter consists of the
word "allow-create" and is followed by either "yes" or "no". If "yes" is defined, the client is
allowed to create object store containers. If this parameter is not included in the command
entry, "no" is used as a default.
Requirements for Command Execution
info
The command entry must conform to the command syntax.
The service set defined in the command entry must exist.
The client defined in the command entry must exist.
The client must exist within the service set.
Successful Command Output
Upon successful completion of the command entry, the following is displayed:
CLIENT modified where CLIENT is the label of the client certificate defined in the command
entry.
Command Operation during Abnormal Conditions
info
1. If the command does not conform to the required syntax, the following is displayed:
Command Failed
SYNTAX where SYNTAX is the command syntax as described under "Command Syntax" in
this section.
2. If the service set does not exist, the following is displayed:
Command Failed
the command entry.
3. If the client certificate does not exist, the following is displayed:
Command Failed
certificate defined in the command entry.
4. If the client certificate does not exist within the service set, the following is displayed:
Command Failed
are the labels of the client certificate and service set defined in the command entry.
Example
# catalyst modify auditor passphrase "new password" "new password"
auditor modified

catalyst modify ports

Description of Command Function
This command provides a means to modify the object store TCP command port and TCP data port
values from their defaults of 9387 and 9388, respectively.
Command Syntax
catalyst modify ports [SETX] [command-port <port-number>] [data-port
<port-number>]
Command Authority
Administratorand HP support
92 Command Instruction Set Details FULL SET SAVE FOR LATER
the command does not conform to the required syntax,
SETX does not exist. where SETX is the service set defined in
CLIENT does not exist. where CLIENT is the label of the client
CLIENT does not exist within SETX where CLIENT and SETX