Config.system.name; Config.system.show - HP Surestore 64 - Director Switch User Manual

Parameters
This command has one parameter.
systemLocation Specifies the new system location for the director or switch. The location can
contain 0–255 characters.
Command Example
Root>
config system location "Everywhere"

config.system.name

Syntax
name "systemName"
Purpose
This command sets the system name attribute.
Parameters
This command has one required parameter.
systemName Specifies the new system name for the director or switch. The name can
contain 0–24 characters.
Command Example
Root>
config system name "Joe's Switch"

config.system.show

Syntax
show
48 config