System Show Config - HP StoreOnce B6000 Series Reference Manual

system show config

Description of Command Function
Displays information on the StoreOnce appliance system configuration.
Command Syntax
system show config
Command Authority
Operator and Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to the command syntax.
Successful Command Output
Upon successful completion of the command, the following is displayed:
D2D appliance name: APPLIANCE-NAME
Product Serial Number: XXXXXXXX
CLI output: OUTPUT
where APPLIANCE-NAME is the parameter defined using the command system set
description (see
defined using the command system set clioutput (see
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, display the following:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
> system show config
CLUSTER ID: d2d485647867b2
Description: NameOfD2D
CLI OUTPUT: text
62 Alphabetical List of Commands and Details
"system set description" (page 61)) and where OUTPUT is the text format
"system set clioutput" (page 60)).