License Add - HP StoreOnce B6000 Series Reference Manual

license add

Description of Command Function
Provides for the installation of a StoreOnce appliance license. The license is entered as a 168
character string.
Command Syntax
license add <license>
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command entry.
Command Parameter Requirements
license – a license string must appear in the command entry after license add. The license
string is 168 characters in length. White space within the license is ignored. The license is purchased
by the customer and provided by HP.
Requirements for Command Execution
The command entry must conform to the command syntax.
Successful Command Output
Upon successful completion of the command, the following is displayed:
license added
Command Operation during Abnormal Conditions
1. If the command does not conform to the required syntax, display the following:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
2. If the license is invalid, the following is displayed:
Invalid License
Example
# license add QACA A99A H9PY KHUY UVA5 HW6F Y9JL KMPL B89H MZVU DXAU
2CSM GHTG L762 M7R6 EWJ9 KJVT D5KM EFVW TSNJ N6CJ 6KGC Q9R9 LB2K 5ART
QNMV 4ZCQ 5YEM Q3ZN FB79 N45F BAUG BKTG 6VAB 3KMW R42A WW64 2N5Q 2R9F
2LME EMJC LBYF
license added
license add 33