System Set Clioutput - HP StoreOnce B6000 Series Reference Manual

system set clioutput

Description of Command Function
Defines the format of the command output. The format can be either ASCII text or xml; the default
is text. Every time a new terminal session is started the default output will be set.
Command Syntax
system set clioutput {text | xml}
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
text or xml – the word "text" or "xml" must be included in the command entry after "config set
clioutput."
Requirements for Command Execution
The command entry must conform to the command syntax.
Successful Command Output
Upon successful completion of the command which included "text," the following string is displayed:
Command Complete - CLI output is in text format
Upon successful completion of the command which included "xml," the following string is displayed:
Command Complete - CLI output is in xml format
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, display the following:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# system set clioutput text
# system set clioutput text
60 Alphabetical List of Commands and Details