Set The System Time - HP STORAGEWORKS SSL1016 Reference Manual

4. While the test is running, you can view the status of the test by clicking View
5. To save the report, click File, Save As, then navigate to the directory where

Set the System Time

If your autoloader is not connected to a time server, you can set the time manually
with Web Administration.
Note:
it is lost and needs to be reset whenever the autoloader is power cycled.
Enter the time zone first, then the date and time. If you want to include time
changes, such as daylight savings time, you must set those manually when they
occur.
To set the time zone:
1. On any Web Administration page, click Configurations.
2. From the first drop-down list next to Time Zone, select the number of hours'
3. From the second drop-down list next to Time Zone, select the number of
4. Click submit.
SSL1016 Tape Autoloader Reference Guide
Status. To refresh the status information, click the Back button on your
browser, and then click the View Status button again.
you want it saved.
The DLT1 and SDLT autoloaders do not have a battery so if time is manually set,
difference between your local time and Greenwich Mean Time (GMT).
minutes' difference between your local time and Greenwich Mean Time
(GMT).
Autoloader Operation
105