Moving An Encryption Blade From One Eg To Another In The Same Fabric; Moving An Encryption Switch From One Eg To Another In The Same Fabric - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual
Brocade fabric os encryption administrator's guide v7.1.0 (53-1002721-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
6
Moving an encryption blade from one EG to another in the same fabric
8. Add FOS4 as a member node to the new EG.
•
•
Moving an encryption blade from one EG to another in the same fabric
In this example, which is represented in
You want to move the blade currently located in DCX1, slot 4 to DCX2, slot 3 in EG2.
TABLE 17
Encryption group
EG1
EG2
1. Enter the following command on FOS1 to reclaim the VI/VT WWN base for the encryption
2. Enter the following command to propagate the change throughout the EG:
3. Remove the blade from DCX1, slot 4 and plug into DCX2, slot 3.
4. Add the moved blade as a member node to EG2.
Moving an encryption switch from one EG to another in the same
fabric
In this example, which is represented in
You want to move FOS2 from EG1 to EG2.
TABLE 18
Encryption group
EG1
EG2
348
For details about adding member nodes to an EG,
group"
on page 149.
For details about creating encryption groups, see
page 40.
Moving a blade from one EG to another EG
Nodes (before move)
FOS1 (Group Leader)
DCX1—Contains 2 FS-18 blades (slot 2 and
slot 4)
FOS2 (Group Leader)
DCX2—Contains 1 FS-18 blade in slot 2
engine to be moved out of the EG.
Admin:switch> cryptocfg --reclaimWWN -EE <DCX1_WWN> 4
When prompted, answer yes.
Admin:switch> cryptocfg --commit
Moving a Brocade Encryption Switch from one EG to another EG
Nodes (before move)
FOS1 (GL)
FOS2
FOS3 (GL)
FOS4
see"Adding a member node to an encryption
"Creating a new encryption group"
Table
17, you have two EGs, each containing two nodes.
Nodes (after move)
FOS1 (Group Leader)
DCX1—Contains 1 FS-18 blade in slot 2
FOS2 (Group Leader)
DCX2—Contains 2 FS-18 blades (slot 2 and
slot 3)
Table
18, you have two EGs, each containing two nodes.
Nodes (after move)
FOS1 (GL)
FOS3 (GL)
FOS4
FOS2
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
on
53-1002721-01
Advertisement
Table of Contents
Troubleshooting
