2
Configuring encryption storage targets
FIGURE 41
13. Review any post-configuration instructions or messages, which you can copy to a clipboard or
66
Configuration Status screen
The screen contains the following information:
•
Device: The device type (target or host).
•
Device Port WWN: The port world wide name.
•
Represented by VI/VT: The virtual target (VT) mapped to the physical target or virtual
initiator (VI) representing the host.
•
VI/VT Port WWN: The port world wide name of the virtual target or virtual initiator.
•
VI/VT Node WWN: The node world wide name of the virtual target or virtual initiator.
print for later, then click Next.
The Next Steps screen displays
key certificates for the encryption switch are displayed. These instructions are specific to the
key vault type.
(Figure
42). Post-configuration instructions for installing public
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01