Command Syntax Conventions; Notes, Cautions, And Warnings; Key Terms - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Command syntax conventions

Command syntax in this manual follows these conventions:
command
option, option
--
argument, arg
-
[ ]
variable
...
value
|
\

Notes, cautions, and warnings

The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance or advice, emphasizes important information, or provides a reference
to related information.
ATTENTION
An Attention statement indicates potential damage to hardware or data.
CAUTION
A Caution statement alerts you to situations that can cause damage to hardware, firmware,
software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely
hazardous to you. Safety labels are also attached directly to products to warn of these conditions
or situations.

Key terms

For definitions specific to Brocade and Fibre Channel, see the technical glossaries on Brocade
Connect. See
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Commands are printed in bold.
Command options are printed in bold.
Arguments.
Optional element.
Variables are printed in italics. In the help pages, variables are underlined or
enclosed in angled brackets < >.
Repeat the previous element, for example "member[;member...]"
Fixed values following arguments are printed in plain font. For example,
show WWN
--
Boolean. Elements are exclusive. Example:
Backslash. Indicates that the line continues through the line break. For
command line input, type the entire line without the backslash.
"Brocade resources" on page xvi for instructions on accessing MyBrocade.
show mode egress | ingress
-- -
xv