Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 49

FIGURE 10
3. Enter the Brocade user name and password, then re-enter the password for verification.
4. Repeat the procedure for each node.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Key Vault Credentials dialog box
The dialog box contains the following information:
•
Primary Key Vault: Primary Key Vault is preselected. ESKM/SKM key vaults are clustered,
so only one set of credentials is needed.
•
Secondary Key Vault: (TEKA key vault only). Shown as inactive.
•
User Name: Enter a user name for the group leader.
•
User Group Name: Displays the selected User Group Name.
•
Password: Enter a password for the group leader.
•
Re-type Password: Re-enter the password for verification.
The following rules apply for ESKM/SKM:
•
Initially, the user name and password are created when a Brocade user group is created
on ESKM/SKM. The switch user name and password must match the user name and
password specified for the Brocade group.
•
The same user name and password must be configured on all nodes in an encryption
group. This is not enforced or validated by the encryption group members, so use care
when configuring the user name and password to ensure they are the same on each node.
•
Different user names and passwords can never be used within the same encryption group,
but each encryption group may have its own user name and password.
•
If you change the user name and password, the keys created by the previous user become
inaccessible. The Brocade group user name and password must also be changed to the
same values on ESKM/SKM to make the keys accessible.
•
When storage is moved from one encryption group to another, and the new encryption
group uses a different user name and password, the Brocade group user name and
password must also be changed to the same values on ESKM/SKM to make the keys
accessible.
Steps for connecting to an ESKM/SKM appliance
2
31