Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 79

FIGURE 36
5. Select the encryption engine (blade or switch) to configure, then click Next.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Select Encryption Engine dialog box
The dialog box contains the following information:
•
Encryption engine: The name of the encryption engine. The list of engines depends on the
scope being viewed:
•
If an encryption group was selected, the list includes all engines in the group.
•
If a switch was selected, the list includes all encryption engines for the switch.
•
If a single encryption engine was selected, the list contains only that engine.
•
Fabric Name: The name of the fabric to which the selected encryption engine (blade or
switch) is configured.
•
Engine Media Type: The media type of the encryption engine. Options are: Tape and Disk.
The Select Target dialog box displays
nodes in the same fabric as the encryption engine. The Targets in Fabric table does not show
targets that are already configured in an encryption group.
Configuring encryption storage targets
(Figure 37). The dialog box lists all target ports and target
2
61