Viewing And Clearing Statistics For Tape Luns In A Container - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

2
Tape LUN statistics
5. Do either of the following:

Viewing and clearing statistics for tape LUNs in a container

To view or clear statistics for tape LUNs in a container, follow these steps:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
FIGURE 59
3. Select Tape as the container of type for which to display or clear statistics, then click Statistics.
84
•
Host Port WWN: The WWN of the host port that is being used for the write operation.
•
A Refresh button updates the statistics on the display since the last reset.
•
A Clear button resets all statistics in the display.
•
Click Clear to clear the tape LUN statistics, then click Yes to confirm.
•
Click Refresh to view the current statistics cumulative since the last reset.
dialog box (Refer to Figure 1
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays
containers is displayed.
Encryption Targets dialog box
The Tape LUN Statistics dialog box displays
members of the selected tape container are displayed.
on page 14).
(Figure 59). A list of configured CryptoTarget
(Figure 60). The statistics for all LUNs that are
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01