Boot Partition Settings; Togglesystembootpartitions; Getsystembootpartitionactive; Setsystembootpartitionactive - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Boot Partition Settings

Use the following commands when you install a new version of the NAS OS or perform
disaster recovery operations.

toggleSystemBootPartitions

Makes the active partition the one currently inactive, and vice-versa.

getSystemBootPartitionActive

Returns the name of the active boot partition.

setSystemBootPartitionActive

Sets the specified partition as the active boot partition.

getSystemBootPartitionList

Returns a list of boot partition names.

getSystemBootPartitionOsBuildnumber

Returns the build number of the operating system

getSystemBootPartitionOsVersion

Returns the version of the OS installed on the specified boot partition.
HP StorageWorks NAS 8000 Command Reference
inParam[0] = Boot partition name
outParam[0] = Partition active
inParam[0] = Boot partition name
inParam[1] = Partition active
outParam[0:N] = Partition names
inParam[0] = Boot partition name
outParam[0] = Build number
inParam[0] = Boot partition name
outParam[0] = OS version
Command Reference
89