Command Reference
getNetworkSmbDomainList
Get the Windows domains that the NAS 8000 has been joined to.
getNetworkSmbDomainName
Get the name of the Windows domain that the NAS 8000 is currently joined to.
joinNetworkSmbDomain
Join the NAS 8000 to a specific Windows domain.
removeNetworkSmbDomain
Removes the HP NAS 8000 from the specified SMB domain.
getNetworkSmbDomainStatus
This call is only applicable when in user (domain) SMB security mode. The result is true only
if the NAS 8000 is still a valid member of the domain. Technically this makes sure the shared
secret between the NAS 8000 and domain controller is valid.
Commands for Mapping Multi-Byte Character Sets
The following commands are used to determine how incoming multi-byte characters are
mapped from the incoming client code page used by the client, into file names in the UNIX file
system. This is only useful if the client's code page and the coding system are set to supported
code, as listed on the smb.conf man page.
getNetworkSmbCodePage
Returns the current value of the samba 'client code page' global variable.
setNetworkSmbCodePage
Sets the value of the samba 'client code page' global variable.
getNetworkSmbCodingSystem
Returns the current value of the samba 'coding system' global variable.
setNetworkSmbCodingSystem
Sets the value of the samba 'coding system' global variable.
52
outParam[0:N] = Joined domain name list
outParam[0] = Domain/workgroup name
inParam[0] = Domain name
inParam[0] = Domain name
outParam[0] = T or F
outParam[0] = Value from the client code page
inParam[0] = Value as listed on the client code page
outParam[0] = Value from the coding system page
inParam[0] = Value as listed on the coding system page
HP StorageWorks NAS 8000 Command Reference