getStorageDasdScsiVa7xxxRedundantCapacity
Returns the redundant capacity – that is, the space used for data redundancy for the current
RAID setting – on the specified storage array.
scanStorageDasdScsiVa7xxx
Updates the list of arrays connected to the HP NAS 8000 system. Used when devices are
added or removed.
shutdownStorageDasdScsiVa7xxx
Shuts down the specified storage array.
restartStorageDasdScsiVa7xxx
Restarts the specified storage array.
getStorageDasdScsiVa7xxxLunList
Returns a list of LUNs on the specified storage array.
getStorageDasdScsiVa7xxxLunMinimumCapacity
Returns the minimum size that can be used to create a LUN.
getStorageDasdScsiVa7xxxLunCapacityIncrement
LUN sizes must be defined using this increment. Default is 1MB.
getStorageDasdScsiVa7xxxLunMinimumNumber
Returns the minimum allowed LUN number. Currently 1.
HP StorageWorks NAS 8000 Command Reference
inParam[0] = VA7xxx DASD name
inParam[1] = Redundancy group (* for all redundancy groups).
inParam[2] = Units (B,MB,GB)
outParam[0] = Included capacity (MB - unless overridden by inParam[1])
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = Units (B,MB,GB)
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
inParam[0] = SCSI VA7xxx DASD name
inParam[0] = SCSI VA7xxx DASD name
inParam[0] = SCSI VA7xxx DASD name
inParam[0] = SCSI VA7xxx DASD name
outParam[0:N] = LUN number list
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = Units (B,MB,GB)
outParam[0] = LUN minimum capacity (MB - unless overridden by inParam[1])
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = Units (B,MB,GB)
outParam[0] = LUN capacity increment (MB - unless overridden by inParam[1])
Command Reference
35