Command Reference
getSystemNtpEnabled
Determine whether the server is configured to sync its system time with NTP servers.
getSystemNtpServerList
Gets the list of NTP servers from which the system is currently getting NTP time
synchronization information.
setSystemNtpEnabled
Enables or disables NTP time synchronization
Email Settings
The HP NAS 8000 lets you automatically notify individuals via email if there is a hardware
failure or a critical system alert.
Note:
sent through the network management tool or they are logged in the system log.
getSystemEmailRecipientAddressList
Returns a list of the email addresses for the recipients of any system alert messages that may
be sent.
setSystemEmailRecipientAddressList
Sets the email addresses for the recipients of any system alert messages that may be sent.
getSystemEmailServerName
Returns the name of the SMTP mail server.
setSystemEmailServerName
Sets the SMTP mail server. The email server must be an IP address or a fully qualified name
(such as alpha.corp.com)
sendSystemEmail
Sends the specified email message to the email recipient list.
62
InParam[0] = Hostname or NTP server IP address
outParam[0] = T or F
outParam[0:N] = List of NTP server hostnames/IP addresses
inParam[0] = T or F
Email settings are optional. In the event of a hardware failure or system alert, messages are
outParam[0:N] = Email recipient address list
inParam[0:N] = Email recipient address list
outParam[0] = Email server name
inParam[0] = Email server name
inParam[0] = Email address
inParam[1] = Email subject
HP StorageWorks NAS 8000 Command Reference