Storage Settings
Storage settings allow you to control Direct Access Storage Devices (DASDs) connected to
the HP NAS 8000 solution. DASDs include disk drives and storage arrays.
getStorageDasdList
Returns a list of Direct Access Storage Devices attached to the HP NAS 8000 system.
getStorageDasdType
Returns the DASD type of the specified device.
Where DASD type can be one of:
getStorageDasdSerialNumber
Returns the serial number of the specified storage device.
getStorageDasdVendor
Returns the vendor name of the specified DASD (as returned by SCSI inquiry).
getStorageDasdProduct
Returns the product IS of the specified DASD (as returned by SCSI inquiry).
getStorageDasdSerialNumber
Returns the serial number of the specified DASD.
getStorageDasdDeviceFile
Returns the name of the device file used to access the specified DASD.
getStorageDasdScsiList
Returns a list of the storage devices attached to or allocated for use with the NAS 8000.
HP StorageWorks NAS 8000 Command Reference
outParam[0:N] = DASD name list
inParam[0] = DASD name
outParam[0] = DASD type
Va71xx = HP VA71xx storage array
Va74xx = HP VA74xx storage array
GenericScsi = Any other SCSI disk or array
inParam[0] = DASD name
outParam[0] = DASD serial number
inParam[0] = DASD name
outParam[0] = DASD vendor
inParam[0] = DASD name
outParam[0] = DASD product
inParam[0] = DASD name
outParam[0] = DASD serial number
inParam[0] = DASD name
outParam[0] = DASD device file
Command Reference
31