Getstoragevolumenumber; Getstoragevolumevolumegroup; Getstoragevolumeavailablecapacity; Getstoragevolumetotalcapacity - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Command Reference

getStorageVolumeNumber

Returns the number of the specified file volume.

getStorageVolumeVolumegroup

Returns the name of the volume group that contains the specified file volume.

getStorageVolumeAvailableCapacity

Returns the amount of available, or free, space in the specified file volume.

getStorageVolumeTotalCapacity

Returns the total raw space in the specified file volume.

getStorageVolumeAtMaximumNumberVolumes

Identifies whether the maximum number of file volumes exist on the HP NAS 8000 solution.

getStorageVolumeMountPath

Returns the mount path, if any, that is defined for UNIX® sharing of the specified file volume.

getStorageVolumeDeviceFile

Returns the name of the device file that is used to access the specified file volume.

getStorageVolumeRootPath

Returns the path to the location where user data is stored on the specified file volume.

getStorageVolumeVolumeMinimumCapacity

Returns the minimum capacity of the specified storage volume.
42
inParam[0] = Volume name
outParam[0] = Volume number
inParam[0] = Volume name
outParam[0] = Volume group name
inParam[0] = Volume name
inParam[1] = Units (B,MB,GB)
outParam[0] = Available Capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume name
inParam[1] = Units (B,MB,GB)
outParam[0] = Total Capacity (MB - unless overridden by inParam[1])
outParam[0] = T (max reached) or F (below max)
inParam[0] = Volume name
outParam[0] = Volume mount path
inParam[0] = Volume name
outParam[0] = Volume device file
inParam[0] = Volume name
outParam[0] = Volume file system root path
inParam[0] = Volume name
HP StorageWorks NAS 8000 Command Reference