Getclusterpackageprimaryowner; Setclusterpackageprimaryowner; Getclusterpackagecurrentowner; Getclusterpackageadoptivenodelist - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

getClusterPackagePrimaryOwner

Gets from the registry, the name of the node that owns the package.

setClusterPackagePrimaryOwner

Required. Sets in the registry, the name of the node that owns the package. Running
'startClusterPackage packageName' without a nodeName argument, starts the package on
the primary owning node.

getClusterPackageCurrentOwner

Gets the name of the node that is currently running the package.

getClusterPackageAdoptiveNodeList

Gets a list of the nodes that are allowed to run the package in a failover situation.

getClusterPackageVirtualIpAddressList

Gets from the registry, the VirtualIpAddress/Subnet values served by this package.

setClusterPackageVirtualIpAddressList

Required. Sets the given VirtualIpAddress/Subnet list for the given package.
For example:

getClusterPackageVolumegroupList

Gets from the registry, the list of volume groups managed by this package.

setClusterPackageVolumegroupList

Required. Sets in the registry, the list of volume groups to be managed for the given package.
For example:
HP StorageWorks NAS 8000 Command Reference
InParam[0] = Package name
OutParam[0] = Primary owning node of the package
InParam[0] = Package name
InParam[1] = Node name
InParam[0] = Package name
OutParam[0] = Node name
InParam[0] = Package name
OutParam[0:N] = Node name list
InParam[0] = Package name
OutParam[0:N] = VirtualIPAddress/Subnet list
InParam[0] = Package name
InParam[1:N] = VirtualIpAddress/Subnet entries
setClusterPackageVirtualIpAddressList pkg1 192.168.100.21/192.168.100.0
InParam[0] = Package name
OutParam[0:N] = Volume group list
InParam[0] = Package name
InParam[1:N] = Volume group list
Command Reference
79