getStorageVolumegroupVolumeList
Returns a list of the file volumes that exist in the specified volume group.
repairStorageVolume
Attempts repairs on a volume. Use this command if, for some reason, the NAS 8000 could not
mount the file volumes due to an error (for example, an array failure and recovery where the
file system logs get corrupted). In these cases, run this command for each file volume that did
not mount after a reboot attempt.
Volume Settings
A volume group is divided into one or more file volumes. File volumes are the basic unit of
logical storage for a file system on the HP NAS 8000. File volumes can be further subdivided
into individual directories. The following commands are used to create and manage file
volumes.
getStorageVolumeType
Returns the type of the specified volume group: file volume or snapshot.
getStorageVolumeList
Returns a list of file volumes that exist on the storage arrays in the HP NAS 8000 solution.
setStorageVolumeSize
Sets the size of the specified file volume.
deleteStorageVolume
Deletes the specified file volume. All data will be lost.
setStorageVolumeName
Renames an existing file volume.
getStorageVolumeExists
Identifies whether or not the specified file volume exists. Answers: Is there a volume with
name?
HP StorageWorks NAS 8000 Command Reference
inParam[0] = Volume group name
outParam[0:N] = Volume name list
InParam[0] = Volume name
outParam[0] = Volume Type
outParam[0:N] = Volume name list
inParam[0] = Volume name
inParam[1] = Size (MB)
inParam[0] = Volume name
inParam[0] = Existing Volume name
inParam[1] = New Volume name
InParam[0] = Volume name
outParam[0] = T (true) or F (false)
Command Reference
41