Getsystempackageauthorized; Getsystempackagedescription; Getsystempackageenabled; Setsystempackageenabled - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Command Reference

Software Module Settings

You can enable/disable the following software modules for use with the HP NAS 8000:
Before use, software modules must be installed, authorized and enabled. The following
commands install, uninstall, enable and disable these software modules.

getSystemPackageAuthorized

Determines whether the specified add-on software modules is installed and unlocked on the
NAS server.

getSystemPackageDescription

Returns the description of the specified add-on software module.

getSystemPackageEnabled

Informs whether the specified add-on software module.

setSystemPackageEnabled

Enables or disables the specified add-on software module.

getSystemPackageList

Lists the add-on software modules available on the NAS server.

getSystemPackageName

Returns the name of the specified add-on software module.

getSystemPackageVersion

Returns the version of the specified add-on software module.
68
Data snapshots
Virus protection
Tape backup
inParam[0] = Package name
outParam[0] = Package enable
inParam[0] = Package name
outParam[0] = Package description
inParam[0] = Package name
outParam[0] = Package enable
inParam[0] = Package name
inParam[1] = Enable
[0:N] = Package names
inParam[0] = Package name
outParam[0] = Package name
inParam[0] = Package name
outParam[0] = Package version
HP StorageWorks NAS 8000 Command Reference