Getstoragedasdscsilungenericdevicefile; Getstoragedasdscsilunredundancygroup; Getstoragedasdscsilunnumber; Getstoragedasdscsiluncapacity - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Command Reference

getStorageDasdScsiLunGenericDeviceFile

Returns the generic device file used to access a SCSI LUN. Generic device files are most
commonly used to send raw SCSI commands to devices.

getStorageDasdScsiLunRedundancygroup

Returns the redundancy group number that this DASD LUN is on. This command should only
be used on LUNs that are on an HP VA7xxx storage array.

getStorageDasdScsiLunNumber

Returns the number of the specified LUN.

getStorageDasdScsiLunCapacity

Returns the capacity of the specified LUN.

getStorageDasdScsiLunInUse

Informs whether the specified LUN is in use, that is, whether it is part of a volume group.

getStorageDasdScsiLunDasd

Returns the name of the specified LUN.

Volume Group Settings

A volume group is the aggregation of one or more LUNs. Volume groups combine the space
from LUNs and make the space accessible to the file system for creating file volumes and
directories, which can then be made accessible to users. The following text commands are
used to create and manage volume groups.

getStorageVolumegroupSystemList

Returns a list of existing system-data volume group names.
38
outParam[0] = Raw device file
inParam[0] = SCSI LUN name
outParam[0] = Generic device file
inParam[0] = SCSI LUN name
outParam[0] = Redundancy group number
inParam[0] = SCSI LUN name
outParam[0] = LUN number
inParam[0] = SCSI LUN name
inParam[1] = Units (B,MB,GB)
outParam[0] = LUN capacity (MB - unless overridden by inParam[1])
inParam[0] = SCSI LUN name
outParam[0] = T (in use) or F (Not in use)
inParam[0] = SCSI LUN name
outParam[0:N] = DASD name
outParam[0:N] = Volume group name list
HP StorageWorks NAS 8000 Command Reference