Getsystemtimezonecurrentgmt; Getsystemtimezoneenabled; Setsystemtimezoneenabled; Getsystemtimezonecurrentdescription - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

getSystemTimezoneCurrentGmt

getSystemTimezoneEnabled

Informs whether time zones are enabled on the HP NAS 8000.

setSystemTimezoneEnabled

Enables time zone support.

getSystemTimezoneCurrentDescription

Displays the current time zone setting description.

getSystemTimezoneCurrentCountry

Displays the current time zone country.

getSystemTimezoneList

Displays the available time zone names.

getSystemTimezoneCurrentName

Displays the current system time zone.
getSystemTimezoneCurrentGmt
Displays the offset from GMT for the current system time zone.
Example: -0700

System NTP Settings

The following commands are used to set the Network Time Protocol (NTP) and choose a
server with which the NAS 8000 can synchronize system time.

addSystemNtpServer

Adds a server to the list of hosts from which to get NTP time synchronization information.
HP StorageWorks NAS 8000 Command Reference
inParam[0] = Time [24HH:MM:SS] or "NOW"
outParam[0] = GMT value
inParam[0] = Time zone name
outParam[0] = Enable status
inParam[0] = Time zone name
inParam[1] = Enable
inParam[0] = Time zone name
outParam[0] = Time zone description
inParam[0] = Time zone name
outParam[0] = Time zone country
outParam[0:N] = Time zone names
inParam[0] = Time zone name
outParam[0] = Offset in hours
Command Reference
61