Setnetworksnmpcommunitystring; Getnetworksnmptrapdestversion; Setnetworksnmptrapdestversion; Getnetworksnmptrapdestcommunity - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

setNetworkSnmpCommunityString

Sets the SNMP community name for this device (default: public).

getNetworkSnmpTrapDestVersion

Returns the version of SNMP protocol to use when sending a trap to this Trap Destination
(currently only v1 and v2c are supported; default: v1).

setNetworkSnmpTrapDestVersion

Sets the version of SNMP protocol to use when sending a trap to this Trap Destination
(currently only v1 and v2c are supported; default: v1).

getNetworkSnmpTrapDestCommunity

Returns the SNMP community name for this Trap Destination (default: public).

setNetworkSnmpTrapDestCommunity

Sets the SNMP community name for this Trap Destination (default: public).

getNetworkSnmpTrapDestDomain

Returns the Domain for this Trap Destination (currently only "UDP" is supported).

setNetworkSnmpTrapDestDomain

Sets the Domain for this Trap Destination (currently only "UDP" is supported).

getNetworkSnmpTrapDestAddress

Returns the address for this Trap Destination.

setNetworkSnmpTrapDestAddress

Sets the address for this Trap Destination. May be numeric (1.2.3.4) or DNS hostname
(snmp.hp.com).
HP StorageWorks NAS 8000 Command Reference
inParam[0] = SNMP community name
inParam[0] = Destination number
outParam[0] = Value
inParam[0] = Destination number
inParam[1] = Value
inParam[0] = Destination number
outParam[0] = Value
inParam[0] = Destination number
inParam[1] = Value
inParam[0] = Destination number
outParam[0] = Value
inParam[0] = Destination number
inParam[1] = Value
inParam[0] = Destination number
outParam[0] = Value
inParam[0] = Destination number
Command Reference
27