Command Reference
copySystemDrfToFloppy
Copies the latest disaster recovery file to a floppy disk. The administrator must supply an
empty DOS-formatted floppy disk. This command takes the files with a .drf extension in the
DisasterRecovery directory on the DISASTER_RECOVERY volume and generates a new tar
file called drf.tar. This drf.tar file is then placed on the floppy disk that has been inserted into
the floppy drive on the NAS 8000 server.
restoreSystemDrfFromFloppy
Restores a disaster recovery file that had previously been stored on a floppy disk. To restore
the DRF, the floppy disk must be DOS-formatted and contain the file: drf.tar.
resetNasHeadToFactoryDefaultSettings
Recovers the NAS server's original configuration if the server gets in a corrupt state and there
is no other DRF file to recover. When you first boot a freshly installed NAS operating system,
a disaster recovery file is generated and saved as
/vol/1/shared/DisasterRecovery/factoryDefaults. Run
resetNasHeadToFactoryDefaultSettings and restart the server. This command
restores the server using the saved factory settings.
88
HP StorageWorks NAS 8000 Command Reference